Amperometric Detection of Ethanol Vapors by Screen Printed Electrodes Modified by Paper Crowns Soaked with Room Temperature Ionic Liquids

A convenient assembly recently proposed for screen printed gold electrodes (SPEs) suitable for measurements in gaseous samples is here tested for the analysis of the ethanol content in alcoholic drinks. This assembly involves the use of a circular crown of filter paper, soaked in the room temperature ionic liquid (RTIL) 1-butyl-3-methylimidazolium hydrogen sulfate, which is simply placed upon a disposable screen printed cell, so as to contact the outer edge of the gold disc working electrode, as well as peripheral counter and reference electrodes. The electrical contact between the paper crown soaked in RTIL and the SPE electrode is assured by a gasket and all components are installed in a polylactic acid holder. This assembly provides a portable and disposable electrochemical platform, assembled by the easy immobilization onto a porous and inexpensive supporting material such as paper of a RTIL characterized by profitable electrical conductivity and negligible vapor pressure. The electroanalytical performance of this device was assayed for the flow injection analysis of the ethanol concentration in some real samples of wine and beer and the results obtained are compared with the alcoholic degree reported in the relevant bottle-labels, thus highlighting a substantially satisfactory agreement. Repeatable sharp peaks (RSD=6–8 %) were detected for ethanol over a wide linear range (1–20 % v/v in water) and a detection and quantitation limit of 0.55 % v/v and 1.60 % v/v were inferred for a signal-to-noise ratio of 3 and 10, respectively.     

Modulating Triplet Excited States of Organic Semiconductors via Tuning Molecular Conformation for Dual-ratiometric Thermometers

The dual-ratiometric thermometry is one of highly accurate methods for microscopic thermal measurement in biological systems. Herein, a series of chromone derivatives with noncovalently intramolecular interactions (NIIs) were designed and synthesized for ratiometric thermometers. The triplet states of these organic compounds were systematically tuned upon regulating the conformation with NIIs to yield efficient room temperature phosphorescence and large wavelength difference between fluorescence and phosphorescence simultaneously. As a result, an unprecedent organic 3D dual-ratiometric thermometer was established based on the intensity ratio and lifetime ratio of fluorescence/phosphorescence vs temperature, which was used for in vitro and in vivo bio-thermometry with high accuracy. This work provides a novel method to achieve organic dual ratiometric thermometers via tuning the triplet excited states.     

Supercooled Liquids with Dynamic Room Temperature Phosphorescence Using Terminal Hydroxyl Engineering

Dynamic room temperature phosphorescence (RTP) materials have potential applications in optoelectronics, which inevitably suffer from poor processability, flexibility or stretchability. Herein, we report a concise strategy to develop supercooled liquids (SCLs) with dynamic RTP behavior using terminal hydroxyl engineering. The terminal hydroxyls effectively hinder the nucleation process of molecules for the formation of stable SCLs after thermal annealing. Impressively, the SCLs show reversible RTP emission via alternant stimulation by UV light and heat. Photoactivated SCLs have phosphorescent efficiency of 8.50 % and a lifetime of 31.54 ms under ambient conditions. Regarding the dynamic RTP behavior and stretchability of SCLs, we demonstrate the applications in erasable data encryption and patterns on flexible substrates. This finding provides a design principle for obtaining SCLs with RTP and expands the potential applications of RTP materials in flexible optoelectronics.     

Ultralow-loss Optical Waveguides through Balancing Deep-Blue TADF and Orange Room Temperature Phosphorescence in Hybrid Antimony Halide Microstructures

Harnessing the potential of thermally activated delayed fluorescence (TADF) and room temperature phosphorescence (RTP) is crucial for developing light-emitting diodes (LEDs), lasers, sensors, and many others. However, effective strategies in this domain are still relatively scarce. This study presents a new approach to achieving highly efficient deep-blue TADF (with a PLQY of 25 %) and low-energy orange RTP (with a PLQY of 90 %) through the fabrication of lead-free hybrid halides. This new class of monomeric and dimeric 0D antimony halides can be facilely synthesized using a bottom-up solution process, requiring only a few seconds to minutes, which offer exceptional stability and nontoxicity. By leveraging the highly adaptable molecular arrangement and crystal packing modes, the hybrid antimony halides demonstrate the ability to self-assemble into regular 1D microrod and 2D microplate morphologies. This self-assembly is facilitated by multiple non-covalent interactions between the inorganic cores and organic shells. Notably, these microstructures exhibit outstanding polarized luminescence and function as low-dimensional optical waveguides with remarkably low optical-loss coefficients. Therefore, this work not only presents a pioneering demonstration of deep-blue TADF in hybrid antimony halides, but also introduces 1D and 2D micro/nanostructures that hold promising potential for applications in white LEDs and low-dimensional photonic systems.     

Diboraanthracene-Doped Polymer Systems for Colour-Tuneable Room-Temperature Organic Afterglow

Organic ultralong room temperature phosphorescence (RTP), or organic afterglow, is a unique phenomenon, gaining widespread attention due to its far-reaching application potential and fundamental interest. Here, two laterally expanded 9,10-dimesityl-dihydro-9,10-diboraanthracene (DBA) derivatives are demonstrated as excellent afterglow materials for red and blue-green light emission, which is traced back to persistent thermally activated delayed fluorescence and RTP. The lateral substitution of polycyclic DBA scaffold, together with weak transversal electron-donating mesityl groups, ensures the optimal molecular properties for (reverse) intersystem crossing and long-lived triplet states in a rigid poly(methyl methacrylate) matrix. The achieved afterglow emission quantum yields of up to 3 % and 15 %, afterglow lifetimes up to 0.8 s and 3.2 s and afterglow durations up to 5 s and 25 s (for red and blue-green emitters, respectively) are attributed to the properties of single molecules.     

Composite Mesoporous Silica Nanoparticles with Dual-color Afterglow for Cross-correlation-based Living Cell Imaging

Room temperature phosphorescence (RTP) materials are characterized with emission after removing the excitation source. Such long-lived emission feature possesses great potential in biological fluorescence imaging because it enables a way regarding temporal dimension for separating the interference of autofluorescence and common noises typically encountered in conventional fluorescence imaging. Herein, we constructed a new type of mesoporous silica nanoparticles (MSNs)-based composite nanoparticles (NPs) with dual-color long-lived emission, namely millisecond-level green phosphorescence and sub-millisecond-level delayed red fluorescence by encapsulating a typical RTP dye and Rhodamine dye in the cavities of the MSNs with the former acting as energy donor (D) while the latter as acceptor (A). Benefiting from the close D-A proximity, energy match between the donor and the acceptor and the optimized D/A ratio in the composite NPs, efficient triplet-to-singlet Förster resonance energy transfer (TS-FRET) in the NPs occurred upon exciting the donor, which enabled dual-color long-lived emission. The preliminary results of dual-color correlation imaging of live cells based on such emission feature unequivocally verified the unique ability of such NPs for distinguishing the false positive generated by common emitters with single-color emission feature.     

Magnetic solid-phase extraction of warfarin and gemfibrozil in biological samples using polydopamine-coated magnetic nanoparticles via core-shell nanostructure

Herein, polydopamine-coated Fe₃O₄ spheres were synthesized using a very simple, easy, cost-effective, efficient, and fast method. First, magnetic nanoparticles (Fe₃O₄) were synthesized and were followed by accommodating polydopamine on the surface of the prepared Fe₃O₄. The prepared polydopamine-coated Fe₃O₄ spheres were utilized as a sorbent in magnetic solid phase extraction of gemfibrozil and warfarin (as the model analytes). The extracted model analytes were desorbed by a suitable organic solvent and were analyzed by high-performance liquid chromatography. Under optimized condition, the linearity of the method was in the range of 0.1–200.0 μg/L for the selected analytes in water. The limits of detection were calculated to be in the range of 0.026–0.055 μg/L for warfarin and gemfibrozil, respectively. The limits of quantification were calculated to be in the range of 0.089–0.185 μg/L. The inter-day and intra-day relative standard deviations were determined to be in the range of 1.4%–3.3% in three concentrations in order to calculate the method precision. Furthermore, the enrichment factors were found to be 78 and 81 for warfarin and gemfibrozil, respectively. Moreover, the calculated absolute recoveries were between 78% and 81%. The obtained recoveries indicated that the method was useful and applicable in complicated real samples.     

An overview of techniques and strategies for isolation of flavonoids from the genus Erythrina

Plants in the genus Erythrina is a potential source of chemical constituents, one of which is flavonoids, which have diverse bioactivities. To date, literature on the flavonoids from the genus Erythrina has only highlighted the phytochemical aspects, so this review article will discuss isolation techniques and strategies for the first time. More than 420 flavonoids have been reported in the Erythrina genus, which are grouped into 17 categories. These flavonoid compounds were obtained through isolation techniques and strategies using polar, semi-polar, and non-polar solvents. Various chromatographic techniques have been developed to isolate flavonoids using column flash chromatography, quick column chromatography, centrifugally accelerated thin-layer chromatography, radial chromatography, medium-pressure column chromatography, semi-preparative high-performance liquid chromatography, and preparative high-performance liquid chromatography. Chromatographic processes for isolating flavonoids can be optimized using multivariate statistical applications such as response surface methodology with central composite design, Box–Behnken design, Doehlert design, and mixture design.     

3D-Printed Bionic Ear for Sound Identification and Localization Based on In Situ Polling of PVDF-TrFE Film

Bionic acoustic sensors are an indispensable part to realize interactions between humans and robotics. In this work, a PVDF-TrFE sensor array with multiple active pixels combined with a 3D-printed bionic ear model is prepared, which can accurately detect sounds with different frequencies and locate the sound source from different directions. The PVDF-TrFE sensor array can clearly identify the sound within 25 cm, and the error between the accepted sound frequency and the original input frequency is less than 0.001%. Through the algorithm analysis of the input signal, the location of the sound source can be immediately analyzed. Compared with other acoustic sensors, this sensor has the advantages of being self-powered, small size, and high flexibility, which holds great potential for bionic applications.     

微波水热两步法合成高可见光响应Ag2S/ZnO及其光催化性能、机理

在不同的制备条件下,通过微波水热两步法获得了一系列Ag₂S/ZnO光催化剂,采用X射线粉末衍射(XRD)、X射线光电子能谱(XPS)、紫外-可见漫反射吸收光谱(UV-Vis/DRS)、扫描电子显微镜(SEM)和N₂吸附-脱附等测试手段对产物结构和形貌进行了表征。结果表明,产物以六方纤锌矿ZnO为主,其晶型结构并未随着反应温度和Ag₂S物质的量的增加而改变。Ag₂S的引入显著增强了光催化剂在可见光区的吸收,使吸收边带发生红移,同时抑制了ZnO(001)晶面的生长。另外,所得产物的形貌随着Ag₂S物质的量的增加从爆米花状转变为少量的柱体颗粒,且BET比表面积经过复合后明显减小。以罗丹明B为目标降解物,研究并比较了一系列Ag₂S/ZnO光催化剂对罗丹明B的光降解性能。结果表明,n_Ag2S/n_ZnO=1:10时,光催化剂在紫外光、可见光和模拟日光的照射下具有最好的光催化效果,优于目前应用最广泛的市售P25。另外,所制备的光催化材料Ag₂S/ZnO经4次循环使用后,其降解效率没有明显下降,表明该催化材料具有一定的光催化稳定性。经捕获实验研究发现,在Ag₂S/ZnO的光催化反应中空穴起主要作用,并根据绝对电负性估算了复合材料Ag₂S/ZnO的能带位置,据此提出了可能的光催化反应机理。